Search

Categories

Newest Uploads

This is a 1" ball for the popular RAM mounts. It should be noted that the hole spacing is not ment to match the factroy suction bases but is smaller to be mounted anywhere you would like.

The "Impossible bolt and nut" is an amusing 3D-printable two-part assembly with a working thread, where a nut is trapped on a bolt. The single STL file contains the nut placed at a slight distance from the bolt's head. The gap between both is sized to create a "skipped" layer thus making a...

This is a case for your Raspberry Pi that looks an awful lot like a classic game console. This would be an ideal candidate for housing a Raspberry Pi-based retrogaming console. At the moment, the .stl files assume a pure-HDMI installation, so there are no holes in the face for analog audio and...

Impossible 3D-printed bolt and nut


Upload # 867
Licensing: Attribution - Share Alike - CC BY - SA
Attribution Link: http://Creative-Tools.com
Layer Height: 0.2 mm
Support Material: No
About Author:
Member Since: Dec 27, 2014
Location: Sweden
More by Author

SCAD / STL Files

Impossible_bolt_and_nut__height_136_mm__-_By_CT3D.xyz.stl

Download stl
Impossible_bolt_and_nut__height_205_mm__-_By_CT3D.xyz.stl

Download stl
Impossible_bolt_and_nut__height_230_mm__-_By_CT3D.xyz.stl

Download stl
Impossible_bolt_and_nut__height_457_mm__-_By_CT3D.xyz.stl

Download stl

Description

The "Impossible bolt and nut" is an amusing 3D-printable two-part assembly with a working thread, where a nut is trapped on a bolt. The single STL file contains the nut placed at a slight distance from the bolt's head. The gap between both is...



Comments