Search

Categories

Newest Uploads

UNTESTED SO FAR! xxdanmurphyxx designed a reinforced (left) NEMA 17 motor mount and published it on Thingiverse (as CC-BY). As the motor shaft position is important for CoreXY mechanics and he didn't mention which other mount to use, I took out the raise here. Mirroring has to be done in the...

See my blog post for details: https://burningbecks.wordpress.com/2018/03/24/tronxy-x5s-heatbed-and-movement/ On Tinkercad: https://www.tinkercad.com/things/gUTlx5egCtZ-tronxy-x5s-melzi20v5-bottom-cooler

Adaptor, based on the "tl-ban-2" file supplied with the printer. Allows mounting of the drag chain of the TronXY X5S closer to the heated bed / farther away from the frame, to enlargen the bend radius of the cables. See blog post for details: ...

CustomSolid INTERLOCKING M3D Micro Spool Holder Bushings


Upload # 925
Licensing: Attribution - Non Commercial - CC BY - NC
Slicer: M3D Beta Software v1.3.6
Infill: 30%+
Printer Used: Micro by M3D
3D Software: M3D Beta Software v1.3.6
Layer Height: Medium(Slow) - 0.2
Support Material: No
About Author:

Mak3rman823

Member Since: Sep 3, 2015
More by Author

SCAD / STL Files

Heavy-Interlocking-M3D-Spool-Holder-Bushing.stl

Download stl

Description

I Didn't like/Couldn't Use ANY of the spool holder bushings that I found already designed for the M3D Spools successfully... (They would keep walking out of the spool and then my spool would drop onto the spindle of my filament holder and everything would get all screwed up...) Soooo... I decided to redesign one that would work. It was designed in ScorchCAD for Android which can be found in the Play Store... These Bushings work well with: THING 705345 (It seems like after browsing that most people choose this spool holder first anyway (>.<) Or with any spindle size under 14mm....



Comments