Search

Categories

Newest Uploads

When using a front-mounted PLA fan with the Wanhao Duplicator 4S 3D printer, there is a chance that it will hit the door covering the front of the machine. Here is a frame that will offset the door by 20mm and allow for a fan to be mounted on the front of the extruder carriage. You will...

This tool is used for leveling dual head nozzles on a Duplicator 4.  Modified version of http://www.thingiverse.com/thing:23013.  Hole center M3 = 75mm, head height =25mm  Added tap in center for preventing head from rotating when adjusting nozzle, worked very well.

Door Offset Frame for Wanhao Duplicator 4S


Upload # 908
Licensing: Attribution - Share Alike - CC BY - SA
Attribution Link: http://www.thingiverse.com/thing:736503
About Author:

wanhaouser

Member Since: Sep 17, 2014
More by Author

SCAD / STL Files

ds4_frame_build-plate_1-of-3_By_CT3D.xyz.stl

Download stl
ds4_frame_build-plate_2-of-3_By_CT3D.xyz.stl

Download stl
ds4_frame_build-plate_3-of-3_By_CT3D.xyz.stl

Download stl
ds4_frame_connector_bracket_By_CT3D.xyz.stl

Download stl
ds4_frame_door_lock_By_CT3D.xyz.stl

Download stl
ds4_frame_lock_bracket_By_CT3D.xyz.stl

Download stl
ds4_frame_lower_left_By_CT3D.xyz.stl

Download stl
ds4_frame_lower_right_By_CT3D.xyz.stl

Download stl
ds4_frame_upper_left_By_CT3D.xyz.stl

Download stl
ds4_frame_upper_right_By_CT3D.xyz.stl

Download stl

Description

When using a front-mounted PLA fan with the Wanhao Duplicator 4S 3D printer, there is a chance that it will hit the door covering the front of the machine. Here is a frame that will offset the door by 20mm and allow for a fan to be mounted on the front of the extruder carriage. You will need to get longer screw for the hinges - M3x40mm screws. Print the parts needed as specified below. Remove the door (and hinges) from your Wanhao Duplicator 4S 3D printer. Connect the four parts of the frame using the four "ds4_frame_connector_bracket". Mount the frame to the printer...



Comments