Sort By:   GridListGallery

 3D Models

Photo Title Descending
Description
Tags
Drain repair for Joseph Joseph "Connect" Dish Drainer / adjustable dishrack Drain repair for Joseph Joseph "Connect" Dish Drainer / adjustable dishrack

Our "Connect" was dropped once and fell onto the water drain. The plastic seems to be unglueable (at least some ASA brim didn't attach to it via cyano acrylate), so I made another drain, that goes under the original one. The idea is that a second part underpins it. That part can be easily...

Connect, Dish Drainer, Josephjoseph
Rey Mago Rey Mago

Escaneado con Rangevision 3d Scanners Figura en yeso escaneada sobre plato giratorio.

"Nanohack 2.0" face mask - Lost World Order remix with altered strap mount "Nanohack 2.0" face mask - Lost World Order remix with altered strap mount

Copper 3d's "solidrim" face mask fits my face pretty good, but the version you can download at opensourcemask.com (or https://copper3d.com/stl/gfacemasknanohack.zip) comes without a logo (or other pattern to increase airflow). Good thing the CC BY-NC 4.0 license allows remixes! As Lost World...

copper3d, covid19, Face Mask, Lost World Order, Nanohack, Thrash Metal
P3Steel SumPanel mount P3Steel SumPanel mount

After the latest upgrades to my TronXY X5S (https://burningbecks.wordpress.com/tag/x5s/) the bits box was full of RepRap components. The main reason for starting building with the P3Steel frame was to put some parts, still too good to be just thrown away, into use again. The panel of the...

Discount Lcd, p3steel, Prusa, Sumpod
P3Steel Version 2.5 RAMPS spacer / offset mount P3Steel Version 2.5 RAMPS spacer / offset mount

As my "v2.5" frame (with motor mounts on the side panels) could not be fitted with toolson's orignal "RAMPS offset mount" I made this in Open SCAD. Materials needed: 4x M3 nut 4x M3 nyloc nut 6x M3x6 2x M3x20

p3steel, Prusa, Ramps, Toolson
Transformer / PSU holder for Kettler "EX1" exercise bike Transformer / PSU holder for Kettler "EX1" exercise bike

Keeps cables out of the way while moving it. Wanted to move that ergometer without haven to dis- and reconnect the transformer every time (and then fetch it again where I left it). You'll loose half of the maximum cable length, but for me it's easier to leave a 230V extension cord near the TV. ...

Cable Management, Ergometer, ex1, Exercise Bike, Kettler
Marshall JCM 900 handle cap (remix) Marshall JCM 900 handle cap (remix)

Rounded the corners of pololevu's "jcm900 Handle endcap" to compensate the "elephant's foot" when printing. Parts shown were printed on Prusa's textured (flexible, removable) steel sheet for visual appeal. These caps fit the "old version" of the amp.

Handle, jcm900, Marshall
Another door hook for "poor man's flip chart" parts Another door hook for "poor man's flip chart" parts

Had to adapt "Poor mans Flipchart V2 by ralfa" (which is a remix of "Poor mans flip chart by hellpower") to the doors at our office. Used OpenSCAD 2019.05 to keep everything customizable.

Flipchart, Graphic Facilitation, Moderation, Office
Ethernet cable coupler fixation Ethernet cable coupler fixation

Resolves broken locking hooks. Had to couple some immured LAN cables at a not-that-accessible position. And (of course) those latching tabs were already broken. The SCAD file should be customizable enough to be used with defferent types of couplers. The zip ties should keep everything...

Coupler, Ethernet, Lan, rj45
Remixed toothbrush holder for Oral B Remixed toothbrush holder for Oral B

Just wanted to share, what I did with Kistenschieber's forward pass.

Braun, Oral B, Toothbrush
Cordless drill adaptor for "Parametric Music Box" Cordless drill adaptor for "Parametric Music Box"

Just for fun - the powertool drowns out the music box ;-) Modified wizard23's OpenSCAD code, to use a three-jaw chuck instead of the crank. Music Box: https://github.com/wizard23/ParametrizedMusicBox (or https://www.thingiverse.com/thing:53235), Video shows Bjorndw's "Happy Birthday" version...

Lol
Make Robot Pendant Stronger Arms Make Robot Pendant Stronger Arms

remix of the Make robot

Maker Camp
End cap for (Reverse-)Bowden-Tubes, customizable End cap for (Reverse-)Bowden-Tubes, customizable

Made this to improve filament protection from moisture. (It should tighten against unwanted airflow into your drybox.) There is still a meter (or so) unrolled from the spool between my drybox (https://www.youmagine.com/designs/slim-anti-tangle-dual-spool-holder) and the hot end. And if it stays...

Bowden Tube, Drybox, Ptfe
Adjustable Cat Fountain Adjustable Cat Fountain

Designs for an adjustable cat fountain that uses a small water pump. The design was made for a enamel bowl but can be adjusted for any bowl by editing the .scad code in OpenSCAD. If you don't wish to downlaod OpenSCAD the parts can be customized here: https://www.thingiverse.com/thing:4047026. The...

Animas, Cat, Drinking, Fountian, Water
Projeto Bomba Centrífuga Didática

Projeto prático construção protótipo de bomba centrífuga - Máquinas de Fluxo

Dual PSU holder for 2020 profiles, made for TronXY X5S Dual PSU holder for 2020 profiles, made for TronXY X5S

Holds two 360W power supplies at the back of the frame. To install the "Tronxy X5S Single z motor mod by spegelius" (https://www.thingiverse.com/thing:3612257) I needed to fix those power supplies somewhere to the frame. So I made this. It holds the stock 12V "S-360-12" and a "Maidodo" branded...

2020, Psu, x5s
"Mk2" TronXY X5S X-Carriage for MGN12 linear rail "Mk2" TronXY X5S X-Carriage for MGN12 linear rail

Metal BMG extruder, Hangtight part cooler, threaded E3Dv6 Hot End, matches my Y-Gantry. This replaces my "TronXY X5S X-Carriage for MGN12 linear rail" (which uses an E3Dv5 / "China J-head" hotend, a Prusa-style, ungeared extruder and a Petsfang part cooler =>...

Bmg, Corexy, E3Dv6, Extruder, Hangtight, Tronxy, x5s
Pencil Holder Pencil Holder

A place to put your pencils and make your desktop a bit more beautiful.

Pencil Holder
Mechanical Laser Show by AdditiveTech Mechanical Laser Show by AdditiveTech

The mechanical laser show is a device that projects a pattern by quickly moving a laser. It's hand powered, 3d printed, open source, and free to print. Parts Each part has different print settings: Cams (2) 15% fill, supports, no build plate adhesion I recommend increasing the...

Mechanical Laser Show
Innokin Endura T22 to Eleaf iStick Pico 25 adaptor Innokin Endura T22 to Eleaf iStick Pico 25 adaptor

Spacer to alter the airflow - only two cylinders subtracted from each other: Outer diameter: 12mm Inner diameter: 8mm Height: 0.65mm Printed in PET.

E Cig, Vape
Filament guide for Sanjiu / SANBrother Metal BMG extruder Filament guide for Sanjiu / SANBrother Metal BMG extruder

UPDATE: The "v4" (blue part in the pictures) was already much tighter, than the (black) stock piece. But it was still not tight enough to print flexibles properly. The "v5" (depicted in copper) should tackle that now. My specimen was printed with a 0.3mm nozzle and 0.35mm line width. You'll...

Bmg, Extruder, Sanjiu
Filament feed-through for dual pneumatic fitting Filament feed-through for dual pneumatic fitting

Flanged, to be mounted to wooden panels. Made this to connect the reverse Bowden tube from my old drybox (https://burningbecks.wordpress.com/2018/06/30/filament-drybox-from-paint-bucket/) to my housing for the X5S. And then guide the filament from there on with another tube to the carriage. ...

Pneufit, Reverse Bowden
Gypsum board to 2020 adaptor Gypsum board to 2020 adaptor

Used this to mount a bottom panel / low flammability floor panel to my X5S. Makes carrying it a lot easier.

2020, Drywall, Gypsum Board, Plaster Board
Jack pad for BMW F20 and CMI ZQ20002 Jack pad for BMW F20 and CMI ZQ20002

Saw Mark Rehorst's blog post, but realized that the interface of my jack is defferent. So I made this in TinkerCAD ( https://www.tinkercad.com/things/8yIxuudpLY4 ). Printed in TPU for toughness.

Car, Jack
Nozzle marker / sorter / holder for M6-threaded non-Volcano nozzles Nozzle marker / sorter / holder for M6-threaded non-Volcano nozzles

As I like to keep my nozzles sorted by source, I needed something flexible to adapt to what was in those individual packages. If you want to compile your own, your need http://en.wikipedia.org/wiki/ISO_metric_screw_thread => threads.scad Pre-compiled STLs in the ZIP archive.

Nozzle Holder, Nozzle Marker, Nozzle Organizer
Fix for snapped cable chain carriers Fix for snapped cable chain carriers

Spare part for "TronXY X5S X-Carriage for MGN12 linear rail". If you did put the M3 nuts into the "nut trap for future upgrades" parts, you can use this in case your "Vertical Cable Chain" counterparts snaps off... You'll need two M3 bolts, ~10mm (when pan-head).

Tier Scooter Phone Holder, attaches to the steering column Tier Scooter Phone Holder, attaches to the steering column

*UNTESTED IN THIS VERSION* "Tier" (www.tier.app) just rolled out their electric pedal-scooters (for rent) here and they miss a smartphone holder (to navigate). There is no way to mount something to the handle, so I made this. [EDIT] Things just changed here - holders have been retrofitted....

Electric Scooter, Smartphone Holder, Tier
Canoa Para Tom, Surdo e Caixa Odery Fluence FLU-TSL-P Unitário Canoa Para Tom, Surdo e Caixa Odery Fluence FLU-TSL-P Unitário

Canoa Odery Canoa para caixa e surdo feito com ABS Podem ser usadas em tons, surdos e caixas. • Distância entre furos de fixação 24mm. • Base para fixar parafuso no casco e a base de borracha. • Suspensas com mínimo contato com casco que resulta...

Biohazardous Candy Kickbin Biohazardous Candy Kickbin

Inspired by the retirement of Ron Marcus from the VA hospital, to be filled with jelly beans and put on top of his retirement cake.  Prototyped at the Innovation Lab on the 3rd floor of the Central Public Library in downtown San Diego, CA....

Biohazard, Candy, Container, Hospital, Kickbin, Trashcan
Reinforced motor mounts with bushing for shaft Reinforced motor mounts with bushing for shaft

STLs in ZIP archive. These motor mounts adress a couple of issues I had with the "Tronxy x5s reinforced left motor mount by xxdanmurphyxx" and my own counterpart, still contained in https://libre3d.com/category/603/Accessories/listings/1228/TronXY-X5S-X-Carriage-for-MGN12-linear-rail.html ...

Corexy, Motor Mount, Tronxy, x5s
3M 6xxx series hook

I have a 3M 6502 (medium size) mask and wanted a nice hook to stop it competing with my shop apron. Should be compatible with pretty much any similar respirator / mask.

Dust Mask, Hook, Organization
Display cover for "PV-Box LCD" Display cover for "PV-Box LCD"

The terminal box of my micro PV system says I have to keep sunlight away from the LC-Display of the integrated "PZEM" powermeter. So I made this. For the "100x100" wall mounted CarpeDiem Energy "PV-Box LCD", Art. No.: 650.016 (https://volxpower.de/PV-Box-LCD).

Photovoltaics, Terminal Box