Sort By:   GridListGallery

 Sports/Outdoors

Catch More Fish (Rod Holder) by jetty
 : 1 |   : 0

An automatic hook setter for a standard ice fishing rod. This device dramatically increases your hookup rate, by setting the hook automatically when the fish takes the bait. It's also safer for fish than conventional means if you're practicing catch and release as it doesn't give the fish the...

Catch More Fish by jetty
 : 1 |   : 0

An automatic hook setter for a standard ice fishing rod. This device dramatically increases your hookup rate, by setting the hook automatically when the fish takes the bait. It's also safer for fish than conventional means if you're practicing catch and release as it doesn't give the fish the...

Longboard Bearing Water, Rust and Dust Sheild
 : 5 |   : 0

This product is paramedic, so you can change it to fit with whatever wheel size you have. The material costs less around $1 for my wheel size, and will vary slightly with how big of a wheel you print it for.  Both pieces are press fit into inner cylindrical surfaces of the wheel...

Mossberg 500 Accesories
 : 6 |   : 0

Pistol grip and picatinny rail for use on a Mossberg 500 12 gauge. May be usable with other Mossberg models. Printed with a 25% infill with supports touching base. Feels solid but has not been tested yet.

Hockey Tape Case/Dispenser
 : 5 |   : 0

This hockey tape case/dispensor will protect hockey tape from getting dirty when tossed in a hockey bag as well as provide a cutting edge to rip the tape when taping up your stick.

Longboard Droid Turbo Mount
 : 5 |   : 0

Phone mount for a Droid Turbo, allows the user to make longboarding videos. There is no Droid specific mount as far as I know; most people tend to use Gopro's. Most board mounts on the market mount with screws through the deck or mount a camera below the deck. This mount attaches using the hardware...

Ski Waxing Vises
 : 9 |   : 1

Description can be found here(site is cutting off text): http://pastebin.com/CCkgUfjc These vises were designed to assist in waxing downhill skis. They were modeled after SWIX Power Pro Vise (http://www.swixsport.com/Products/Wax-Tuning/Tuning-Equipment/Vises/Power-Pro-Vise). There are a...

AR15 Freefloat Handguard
 : 3 |   : 0

This is a freefloat handguard of a AR-15 rifle. It is 7 inches long and works best for an AR pistol. With a 25% infill there is 106 g of fillament used. Using hatchbox fillament from amazon the final cost came out to be $2.33 compared to a retail cost of $100 to $250. 

Uni-Troll Downrigger Base
 : 2 |   : 0

Uni-Troll Downrigger Base compatible with all Uni-Troll Cannon downriggers. Made for MY4777 'Big Money' project at Michigan Tech under the instruction of Dr. Joshua Pearce. 

Trolling Motor Prop
 : 3 |   : 0

A prop that should work on a trolling motor. The mounting hole has to altered to whatever model you have, those are in the begining and commented out. During the scetion where the mounting hole is removed from the solid part, I would reccomend removing a triangle so that the ends of the prop...

Snowboard binding degree plate
 : 5 |   : 0

This is a standard degree plate for snowboard bindings. Size is modeled off of a Burton binding but slots are made to fit to a 2cmx4cm or 4cmx4xm hole pattern. Made using OpenSCAD and code can be ultered for quick and easy dimension changes if need Why pay $10-$20 for a new set when you can...

Soccer Shin Guards
 : 3 |   : 0

I replaced a cracked shin guard with a 3D printed version. This was done for the Michigan Tech course MY4777. The plastic for a set of shin guards would cost $1.32. The shin guards were purchased for $15.90 from Dunhams. This is a cost saving of $14.58 (92%).  It took approximately 1 hr and...

Michigan Tech Divot Removal Tool
 : 1 |   : 0

As I began preparing my Christmas list this year I started to browse the internet for cool gadgets I could add to my collection at home. I stumbled upon a really expensive divot tool (somewhere around $15 - $20); this agitated me to the point where I had to make a customized divot removal tool to...

Powder Baskets
 : 5 |   : 0

3D Print your very own powder baskets for skiing or hiking poles! Using a parametric SCAD file to customize the baskets for your needs. Inputs for pole diamter, basket size, and strength. Designed to press fit onto an existing barb using heat to melt the plastic around it.

hockey helper
 : 1 |   : 0

This tool will assist any hockeyplayer trying to learn how to properly stick handle. Just clip it onto your stick and your ready to go. The cost of this print is less than a dollar, which is a 90%cost savings.

Customizable Tent Spike
 : 1 |   : 0

This is a simple open-source parametric tent spike to be used to hold a tent or anything else you need to keep on the ground out in a field. We are using them to test different prototypes of small-scale portable solar photovoltaic racking designs. Choose dimensions that will fit on your print...

Paddle and Oar Hooks
 : 1 |   : 0

Do you have paddles or oars laying around? Make some custom hooks for them and hang them on your walls. Measure the width of your paddle or oar in mm and then use the Customizer to make a custom hook for it. You can adjust the angle of the hooks, length etc. so that it fits your oars...

eSherpa - First Electrically Driven eTrolley
 : 13 |   : 1

The eSherpa - the first electrically driven eTrolley for tandem pilots! eSherpa is the first electrically driven eTrolley for tandem pilots. Strong enough to carry 30 kg uphill and compact enough to be flown back down … Of course there are plenty of other things which eSherpa can...

 Rock Wall Hold Example
 : 1 |   : 0

This is an example for the rockwall assignment in MTU's  Open Source 3-D Printing Class.