Sort By:   GridListGallery

 Household

FRITZ!shelf
 : 4 |   : 0

Corner shelf for FRITZ!WLAN Repeater 1750E Further description see: https://burningbecks.wordpress.com/2017/11/22/fritzshelf/ Made with Tinkercad: https://www.tinkercad.com/things/5NfbHzsJjcu-corner-shelf-for-fritzwlan-repeater-1750e

Bed Riser
 : 5 |   : 0

This is a 3" Bed Riser that can be stacked to increase the height of your bed. Bed Risers cost anywhere from $5 - $22 This model costs about $2.50 to print.

 : 4 |   : 0

This hook is used to saved space when hanging bulkier clothes in your closet. It lowers the bulk point enabling someone to hang more clothes in their closet or keep an outfit together to eliminate searching for the other article of clothing.

Double Banana Hook
 : 1 |   : 0

Base and hook for hanging bananas. Threaded design, use command strips to attach cabinet. Used Dan Kirshner's ISO-standard thread library[http://dkprojects.net/openscad-threads/]  for OpenSCAD.

Rocking Nail Polish Holder
 : 3 |   : 0

Place any bottle of nail polish in this holder while you paint your nails. It will tip and wobble but never fall or spill. When you want to get more polish on your brush, tilt it to one of the sides and it will hold steady for you.  Cost:  Plastic -- $1.50 (66g at $22/kg) Silicon...

Toothbrush holder
 : 1 |   : 0

This is a toothbrush holder. It can be customized to hold more toothbrushes or to be made larger. A commercial equivalent is around $7.59, giving a cost savings of $6.56.

Face Cookie Cutter
 : 1 |   : 0

A cookie cutter of someone's face! A custom cookie cutter costs $50.77 on Etsy (https://www.etsy.com/shop/Copypastry?ref=l2-shopheader-name).  A 10g cookie cutter costs $0.23 based on $22.98/kg.  Printing a custom cookie cutter yourself saves $50.54, a savings of 99.5%.

Microwave Turntable Gear Replacements
 : 1 |   : 0

These are two different gear styles that make the microwave plate turn. They were designed as replacement parts. The three pronged gear may need to be scaled slightly to fit your microwave. Most microwaves should use one of these style parts.

Extended Razor Stand
 : 1 |   : 0

This razor stand is fully printable, and requires no hardware for assembly. It is capable of storing up to Four (4) double edge, straight, or even cartridge razors, and up to two (2) shaving brushes. The stand also has a wide base to store soaps or a lathering bowl.  This was designed for...

Necktie Hanger
 : 2 |   : 0

This hanger will hold 12 ties all in one spot, much like a shirt hanger. I uploaded a connctor I was working on but havent perfected yet. I used a M3 x 40 bolt to secure the tie holder to the hanger hook.

Variable Holder Clamp
 : 12 |   : 0

This variable holder clamp was designed to hold a computer headset on the edge of a table for convenient storage. It is parametric in almost every setting. While it is meant for being attached to a horizontal table or desk edge, it can be applied to a vertical standing edge with reasonable grip and...

Modular wine rack
 : 3 |   : 0

A module wine rack. All the pieced can be printed individually and constructed how ever you want it to look. The rack can even be mounted upside if need be (would need to have a special mount bracket made), only tested with one full bottle of wine upsidedown.  

Beer Holder for Desk
 : 3 |   : 0

I cant upload FreeCad files on this site so please go to Thingiverse for FreeCAD: http://www.thingiverse.com/thing:1188195 Holder for beer. Attaches to desk via simple friction fit. Even has a little hook on the side to hang your bottle opener. Of course this will also fit your standard pop...

3D printed cell phone cup hold for lg g3
 : 1 |   : 0

Have a cup holder without a use? Have a Lg G3? well then you need the cellphone cup holder! Tilted at an optimal 20 degrees in the horizontal orientation.

Potato Masher
 : 6 |   : 0

This kitchen can be used to mash potatos that have been boiled. Using 3D printer and filament the potato masher serves as a cheaper alternative than commercial mashers.The potato masher has a total print time of 2 hr 1 min. The potato masher has two parts: a handle and the masher base. An adhesive...

Arrow Display Hook
 : 2 |   : 0

My son was presented with an arrow upon graduation from Webelos, so he needed a place to keep and display it. So that's what this is. It's designed to be held in place with 2 push pins. We only had the big ones, so it kind of traps the arrow in the hook, which doesn't look as good but is...

Customizable Rolling Pin Holders
 : 1 |   : 0

My wife got these new age rolling pins - that are great but they turned out to be too large for the drawers. 3D printer to the rescue -- reasonably stylish toroids to hold them on the kitchen cabinet.

Slanted Stacking Bins
 : 1 |   : 0

The floor of these bins are are slanted towards the front. Half sized bins are also available. Useful garage storage solution

Electric Outlet Covers and Plugs
 : 1 |   : 0

The idea for this set of things it to make the base designs for custom outlet covers both decora and duplex. The first goal of this project is for electric safety for families with young children with an unhealthy interest in electric outlets. Some of the covers have the electric holes...

Physical Photoresistor Regulating Device
 : 1 |   : 0

This model is designed for the average outdoor floodlight with a photoresistor. At my house, I have several of these lights, and when one turns on, it shuts the others off. This design limits the angle of light exposure to each light.

Christmas Tree Stand
 : 1 |   : 0

An adjustable stand for holding up a Christmas tree.  Parameter within the OpenSCAD file can be changed to accomadate different size tree trunks and leg length.

wine glass hanger
 : 3 |   : 0

A 3D Printed wine glass holder using the RepRap Delta model 3 d printer with PLA filament. the holders are easy to print and can be attached under a shelf or cupboard by 3/16" bolts and nuts for simplicity. A general wine glass holder can cost anywhere around 75 to 200 dollars, but this 3d printed...

Safety Razor
 : 2 |   : 0

Real men shave with a razor holder they print themselves. Sorry Gillette.   It works - the picture is of me having just shaved half my face with it.   Instructions:   To print: top, bottom and handle prints    m3 nut and screw.   Print the...

Door Wedge of Cheese
 : 2 |   : 0

Hold your door open and attract mice with false promises! The cheesiest way to prop open a door...

Adjustable Laptop Stand
 : 5 |   : 0

Worried about the news reports that "sitting is the new smoking"? Are you sitting now? Stand up at your desk and tone your backside while you work with this handy completely adjustable laptop stand. The open-source stand is made from 3-D printable joints and open-beam. Press on the spring loaded...

The Vornaments!
 : 5 |   : 0

Ornament numbering (1-7) roughly correlates with difficulty of printing. Regardless, getting the first layer stuck to the build platform, and printing with a thick brim, are essential. Some of the ornaments have very aggressive overhangs, and having your cooling and print temperature dialed in is...