Sort By:   GridListGallery

 Science

IKTD_Prüfkörper_FDM-Feinguss
 : 1 |   : 0

Prüfköper zur Validierung der kombinierten Restriktionen für eine Prozesskette aus FDM und Feinguss. Test body for the validation of the combined restrictions for a process chain from FDM and precision casting.

Photometer for Nitrate Testing
 : 1 |   : 0

Open-source testing platform capable of performing Nitrate Reductase Nitrate-Nitrogen Analysis Method. This allows you test for nitrates in water, soil, etc. Arduino compatible - read the tests on your Android device. For BOM, electronics and instructions please use resource link #1. For...

Photometer for Nitrate Testing
 : 1 |   : 0

Open-source testing platform capable of performing Nitrate Reductase Nitrate-Nitrogen Analysis Method. This allows you test for nitrates in water, soil, etc.   Arduino compatible - read the tests on your Android device.   Resource Link 1: BOM, electronics and instructions ...

Fiber Optic Cable Switcher
 : 2 |   : 0

This is a holder to attach two fiber optic cable to a 8mm smooth rod and allow easy switching between cables for optical experiments. This component is part of the Open-source optics project (see reference links for details), whose goal is to radically reduce the cost of scientific optical...

Customizable Lens Holder
 : 1 |   : 0

This is a lens holder for optical experiments.   This component is part of the Open-source optics project, whose goal is to radically reduce the cost of scientific optical hardware: by the Michigan Tech's Open Sustainability Technology Research Group. All measurements in mm. Scale...

Optical Rail Mount for OpenBeam
 : 1 |   : 0

This is part of a system of prints that turns an Open Beam into an optical rail. An optical rail is a long, straight, sturdy rail onto which optical components such as light sources and lenses can be bolted down and easily shifted along the length of the rail.   Commercial optical rail sells...

Customizable Chopper Wheel
 : 1 |   : 0

This is a chopper wheel for optical and optoelectronic experiments.  This is a customizable chopper wheel -- derived from the very nice ---Parametric encoder wheels and the shaft lock for wheels with a nut cage for mounting firmly to a spinning shaft from our less versatile Parametric...

Customizable Square Array of Cylinders
 : 1 |   : 0

This is a quick customizable way to make an array of columns of any size and with any size columns.  This little design is a great example of the beauty and power of OpenSCAD as it has lots of uses -- everything from setting up a 3-D printable plinko game to using them to make holes in your...

Half Sphere of Fluid
 : 1 |   : 0

This customizer OpenSCAD script puts a half sphere depression in a cube - to be used for reactionware testing. You input the number of mL you want to use. Check my math.

Lid for Half Sphere of Fluid with Injection Hole
 : 1 |   : 0

This script makes a lid with a hole for injecting chemicals for a half sphere depression in a cube - to be used for reactionware testing. It is parametric and sized depending on the mL of fluid. 

Lid for Half Sphere of Fluid
 : 1 |   : 0

This script makes a lid for a half sphere depression in a cube - to be used for reactionware testing. It is parametric and sized depending on the mL of fluid. 

Open Source Syringe Pump
 : 1 |   : 0

This is a customizable fully parametric open source syringe pump. For the design in OpenSCAD so you can customize the components for the complete pump, bill of materials, operation and assembly instructions go to the reference links.   The details of the syringe pump are in the academic...

Open Source Water Testing Platform
 : 3 |   : 1

This project details an open source water testing platform derived from the open-source colorimeter, which is made from open source electronics and 3-D printable components. This is part of a larger project to reduce the cost of scientific equipment using open-source hardware.    For...