Sort By:   GridListGallery

 Engineering

Photo Title Descending
Description
Tags
Parametric Clamp Parametric Clamp

Pipe parametric clamp

DSLR Automated zoom mount DSLR Automated zoom mount

This aims at providing a way to automate zoom on DSLR manual lens. The main drive for this project is to allow completly autonomous camera control through software. This uses a NEMA 17 stepper motor mounted with 4x 10mm M3 bolts. A standard skate bearing is held in place with a 1 inch 5/16 bolt....

Custom case for WCE WIMMS Project - Receiver Pack Custom case for WCE WIMMS Project - Receiver Pack

This is a design I made to house our enterprise project. We needed a case that was light and as compact as possible. We are also designing the circuity and needed to be able to easily modify the the case to fit with our components and buttons. The case is easily scalable and worked well for our...

OS Four Point Probe head holder OS Four Point Probe head holder

The design is for an Open Source Four Point Probe (OS-4PP) used for electrical characterization of thin films ( sheet resistance measurements). The holder consist of two main components; i). The holder ring and,  ii). The carriage. The carriage is attached to the modified 3D printer stage belt.

Four Point Probe System, Open Source
Solar Simulator Sample Ring Solar Simulator Sample Ring

This is an OpenSCAD design of a ring to hold samples for light soaking in a solar simulator. Print and attach sample with binder clips and hold with chemistry clamp as in photo.  This component is part of the Open-source optics project, whose goal is to radically reduce the cost of...

Solar Simulator Sample Ri