Sort By:   GridListGallery


DSLR Automated zoom mount
 : 2 |   : 0

This aims at providing a way to automate zoom on DSLR manual lens. The main drive for this project is to allow completly autonomous camera control through software. This uses a NEMA 17 stepper motor mounted with 4x 10mm M3 bolts. A standard skate bearing is held in place with a 1 inch 5/16 bolt....

Custom case for WCE WIMMS Project - Receiver Pack
 : 3 |   : 0

This is a design I made to house our enterprise project. We needed a case that was light and as compact as possible. We are also designing the circuity and needed to be able to easily modify the the case to fit with our components and buttons. The case is easily scalable and worked well for our...

OS Four Point Probe head holder
 : 1 |   : 0

The design is for an Open Source Four Point Probe (OS-4PP) used for electrical characterization of thin films ( sheet resistance measurements). The holder consist of two main components; i). The holder ring and,  ii). The carriage. The carriage is attached to the modified 3D printer stage belt.

Solar Simulator Sample Ring
 : 1 |   : 0

This is an OpenSCAD design of a ring to hold samples for light soaking in a solar simulator. Print and attach sample with binder clips and hold with chemistry clamp as in photo.  This component is part of the Open-source optics project, whose goal is to radically reduce the cost of...